Astrum

LED Light Bars

 

The Astrum LB colour change fixture is a totally new concept in producing linear colour changing illumination.

The system is totally flexible and can be used for a host of traditional applications and a range of never before possible applications.

The system is available as a wide angle system or as a powerful linear wall washing system with highly efficient optical components.

The Astrum LB system can be configured for interior or even IP68 exterior applications

• Long Life:  50,000 hours

• Deep saturated colours
• Low energy consumption: 30 watts
• Fully DMX controlled
• Low profile design
• Range of beam angles
• Robust construction
• IP68 options
• Simple plug & play installation
• Standard modular lengths
• Adjustable mounting brackets
• Low voltage operation
• Optimised thermal management

• Optical data shown for 1200mm module (can be applied pro-rata for 400 and 600 modules)

• Typical Lumen maintenance 70% at 50,000 hours @ 25ºC ambient temperature

• For more information on L.E.D. performance request L.E.D. technical datasheet

• Full photometric performance data for optic range is available from Chamaeleon Technologies Ltd.

• Standard lengths :1200mm, 600mm, 400mm (Special Lengths to Order)

• Finish Body :Silver Anodised Aluminium

• Front (interior) :Acrylic

• (IP68) :Resin Lens System

 

• Ingress Protection : IP68 (interior IP42)

• Ambient temperature : - 20 to +40ºC

• Maximum body temperature : +75ºC

• Mean time to failure :50,000 hours @ 25ºC ambient

   Typical Installation Method

Modules are supplied with 3.0 meters of cable for direct connection to the Modulation Driver or use with the Chamaeleon modular wiring system. In certain exterior installations direct hard wired connections may be required - contact Chamaeleon for more information.

 

• Electrical Power consumption max : Red : 12.0 Watts

  • When channel @ 100% :

  • Green : 14.4 Watts

  • Royal Blue : 14.4 Watts

• Input Current at full power : 350mA

• Maximum Forward Voltage : 48 VDC

• Compatible drivers : Astrum AU36

• Connection : 3.0m cable with Molex Micro fit 3 connector

• Unit is equipped with thermal sensor which will protect the LEDs from high ambient operating temperature. See Modulation Driver data for full details of mains power requirements and DMX operation.

• Products represented here are IEC825 Class 2 for eye safety. Do not stare into the L.E.D. light beam at close range.

• Fixtures should only be connected to Chamaeleon approved drivers.