Link back to our Home Page

Astrum

Special Effects Wall Washers

 

 

   

 

 

    

 

Operating on 90-264V AC, with full 24Bit RGB resolution with 256º gray scale functionality controlled via onboard DMX and incorporating all the exciting colour versatility and effects of the Astrum series, the Chamaeleon trio of Astrum WW600, 1200 and 1800 INDP wall wash luminaires are designed to provide the operational versatility to achieve bright, optimum levels of even illumination along a broad voltage range. Featuring 720, 1440 or 2160 Ultra bright LEDs in equal configurations of red, green and blue, the Astrum WW600, 1200 and 1800 INDP units give today’s lighting designers the capability to meet and any exterior feature or architectural lighting project.

With the advantage of multi-voltage operation and with super-intensity LEDs providing a low heat, ultra-long life of up

to 100K hrs, Astrum WW600, 1200 and 1800 INDP wall wash luminaires are energy efficient and replacement and maintenance costs are minimal.

Astrum WW600, 1200 and 1800 INDP luminaires are made from aluminum alloy and totally sealed.

The units have a light projecting distance of 20metres and the light intensity can be increased by a simple angle adjustment of the unit.

Unit connections are plug-and-play and have been designed for fast, economic operation and installation.

 

  • DMX Control

  • Full RGB functionality

  • Up to 16 million colours

  • IP65 Protection

  • 100,000 hours LED life

  • Plug-and-play installation

  • Interior/Exterior

Offering sequences of pre-programmed colour effects via the onboard controller, Chamaeleon Astrum WW600, 1200 and 1800/INDP wall wash luminaires are available for multi-voltage operation and supplied as ready to play. Custom programming and effects can be added using a DMX512 controller with RS485 protocol. WW600, 1200 and 1800/INDP units can be wired together to produce lighting systems of up to 30 units. Larger systems are achievable by routing the units back to the controller via ST/DMX/AMP junction/interfaces.

For information on DMX Control Systems and interfacing please contact the Chamaeleon Technologies Sales Office.

Native Colour Effects

  • Static Display :single display of any of 16million colours by mixing colours

  • Intensity Change : Colour transitions through high to low brightness

  • Cross Fade :alternating colours

  • Colour Chase : colour follows colour in harmonised sequence

  • Circulation :a single colour wash circulates at a regulated interval

 

     Dimensions

       

 

 

Astrum WW INDP  - General System Specification

Colour Resolution:

Continuously variable colour and intensity

Colour Range:

Intensities of red, blue and green LED mixed to produce over 16 million colours

Light Source:

High Output Light Emitting Diodes

Optimum Light Projecting Distance:

20M

Native Optical Angle:

20º

Adjustment Angle

 0 - 300 degrees

Signal Transferring Format:

Standard DMX protocol (RS485 terminal)

Controlling System:

DMX512 (3 channels per segment)

DMX Address:

Digital coder with LCD mounted at rear of unit

LED MTTF:

100,000 hours

Connection Method:

Standard signals cables and input power cables

Connector:

3 pin signal connector

Housings:

Aluminium alloy

Weight:

WWINDP600    5.35 kg

WWINDP1200   9.1 kg

WWINDP1800  13.5  kg

Operating Temperature

-20ºC to 40ºC

Protection Rating

IP65

 

Astrum WWLBPC - Electrical Specification

Voltage

Model

Power

No. of LED's

LED Life

90-264v AC

600mm

50 w

240 each of R, G & B

100,000 hrs

  1200mm 

 100 w

 480  each of R, G & B

  1800mm

 150 w

 720  each of R, G & B

 

 

 

 

 

 

         Ordering Codes

 

AST/WW600/INDP/UB          Aluminium housing with 720 Ultra-bright LEDs

AST/WW1200/INDP/UB        Aluminium housing with 1440 Ultra-bright LEDs

AST/WW1800/INDP/UB        Aluminium housing with 2160 Ultra-bright LEDs

 

 

For information on DMX Control Systems and interfacing please contact the Chamaeleon Technologies Sales Office.


 

 

HomeAbout UsProductsProjectsContact UsSite Map

 

Chamaeleon Technologies Ltd.  - 49 Cutlers Road, South Woodham Ferrers, Essex, CM3 5WA. United Kingdom